I can confirm it works on my TimingPower RK3188 using Rockchip Batch Tool as well as copying update.img to SD. This is what it does: Extract update.img as well as system.img. Pre-root your firmware. Open system folder to edit your rom. Repack update.img. Let me know how it works. Unpacking is extracting update.img from releaseupdate.img, and then unpacking all the image files inside. While repacking, it is the inverse process. It synthesizes the image files described by the package-file, into update.img, which will be further packed together with the bootloader to create the final releaseupdate.img.
This is a quick guide to Flash single firmware image files onto your tablet. Manufacturers mainly provide single image files to upgrade tablets, as do some Rom Cookers for their custom firmwares. If you want to install a custom firmware or want to return your tablet back to a manufacturers stock rom, for warranty purposes etc this is sometimes the only way to do it. It is quite straightforward to do so here we go!
Firstly this is presuming that you have already installed the Rockchip drivers for your tablet if not follow my guide here: http://www.freaktab.com/showthread.p…-for-flashing!
STEP 1
Make sure your tablet is charged. Download the Rockchip batch tool
Rockchip Batch Tool Download
STEP2
Unzip the file and start the RKBatchTool program, and use the firmware path selector to find your firmware image.
Now put your tablet into recovery mode or flash mode as it is sometimes called and connect it to your PC. As you will see you will see that your device is connected, indicated by the green box. If you are upgrading from say a manufacturers Rom to a new version that hit the upgrade button, if you are installing a custom firmware that usually it is the restore button.
Step 3
Once you have done this the software will send the firmware to your tablet and the flashing process will begin, you will see firmware loading on the RockchipBatchTool screen, just leave it to do its work and be patient and be careful not to knock or touch anything while it is flashing. Once the process has completed your tablet will disconnect from the program and the green box will not be highlighted. Now the tablet will begin to flash and reboot with your new firmware on it!
Firstly this is presuming that you have already installed the Rockchip drivers for your tablet if not follow my guide here: http://www.freaktab.com/showthread.p…-for-flashing!
STEP 1
Make sure your tablet is charged. Download the Rockchip batch tool
Rockchip Batch Tool Download
STEP2
Unzip the file and start the RKBatchTool program, and use the firmware path selector to find your firmware image.
Now put your tablet into recovery mode or flash mode as it is sometimes called and connect it to your PC. As you will see you will see that your device is connected, indicated by the green box. If you are upgrading from say a manufacturers Rom to a new version that hit the upgrade button, if you are installing a custom firmware that usually it is the restore button.
Step 3
Once you have done this the software will send the firmware to your tablet and the flashing process will begin, you will see firmware loading on the RockchipBatchTool screen, just leave it to do its work and be patient and be careful not to knock or touch anything while it is flashing. Once the process has completed your tablet will disconnect from the program and the green box will not be highlighted. Now the tablet will begin to flash and reboot with your new firmware on it!
Sam mastic In My 1st post so Clear Hire
i m right 1st post G1 G2 G3 Mins GEN 1 GEN 2 GEN3
Flashing your Arnova GEN1 Arnova GEN2, Arnova GEN3
GEN1 flash SUPPORT MODEL
ARNOVA 10b
ARNOVA 10
ARNOVA 7
ARNOVA 8
ARNOVA 84
Flash Tool GEN 1 Hire : http://www.mediafire.com/?cbg6dzd9vww4nfv
Video Gide GEN 1 Hire :unbrick RK2818 with rkandroidbatchupgrade - YouTube!
GEN2 flash SUPPORT MODEL
ARNOVA 10 G2
ARNOVA 10 G2 philadelphialnquirer
ARNOVA 7 G2
ARNOVA 7b G2
ARNOVA 7e G2
ARNOVA 8 G2
ARNOVA 8 G2 Dual Tuch
GEN3 flash SUPPORT MODEL
ARNOVA 10d G3
ARNOVA 7B G3
ARNOVA 8 G3
ARNOVA Childpad Alvin capacitive
ARNOVA Childpad Alvin Resistive
Flash tool GEN2 GEN 3 hire http://www.mediafire.com/download.php?727ye83bty7ns2t
Arnova GEN3 Arnova GEN2 Video guide
Hire:Google Play (Android Market) on Arnova G3 and Arnova 9 G2 - YouTube!
Flashing your Arnova G1 Arnova G2, Arnova G3
Rockchip RK29xx/RK30xx based tablet with Rockchip
Arnova GEN1 GEN 2 GEN 3
1 Download and unpack the firmware you want to flash, please get the official firmware Hire : ARNOVA
for your device if you want to restore the tablet as stock or use a custom firmware.
Download and unpack Rockchip_Batch_Tool_v1.5.zip (latest Rockchip Flasher tool version 1.5)
Shutdown the tablet, you may want to wait for a few seconds to make sure it does not restart
Execute the flashing tool RKBatchTool.exe on your computer
On Windows Vista or Windows Seven, you will have to Right Click on the program and select Run as Administrator
Arnova G32. Entering /recovery flashing mode on the tablet
You need to put the device in flashing/recovery mode to transfer the firmware firmware to the tablet with Rockchip tool.
The general idea is to put a paper clip in the reset pinhole of the tablet, combined with a button press. You first need to push the reset, holding it for a few seconds then press the activation button (depends on the tablet model) while holding the reset for a few seconds, then release the activation button and the reset.
push the Volume + button on your tablet and keep the button pressed while you insert a paperclip in the RESET pinhole. Keep the paperclip pushing the reset and the Volume + button pressed for about 15 seconds. The tablet screen should turn black.
On the Arnova 9 G2 :
insert a paperclip in the Reset pinhole of the tablet and press the Menu button
On the Arnova 9 G3 and ARCHOS 97 Carbon
insert a paperclip in the Reset pinhole of the tablet and press the Home button
On the Arnova 8 G2:
insert a paperclip in the Reset pinhole of the tablet and press the Power button
On the Arnova 7 G2:
put the Power switch to the right position (where a little lock is drown)
and insert a paperclip in the Reset pinhole on the back of the tablet.
On the Arnova 7b G2:
insert a paperclip in the Reset pinhole of the tablet and press the Power button
On the Arnova ChildPad:
insert a paperclip in the Reset pinhole of the tablet and press the Power button
On the Arnova 8c G3:
Switch the tablet off, press the volume- button, keep it pressed in and then connect the tablet with an usb cable to the computer.
3. Installing the drivers on the computer
Following the tablet entering in flashing mode, the computer should now show it has found a new USB device and prompt for a device driver. Select the appropriate driver in the driver directory from the Rockchip Flash Tool 1.4 package, then select the right folder that corresponds to your computer platform and operating systems.
There are 6 supported systems:
in drivers32bits folder you will find subdirectories for the following operating systems: (Windows 2000 drivers, Windows XP, Vista and Win7 in 32 bits).
in drivers64bits you have directories supporting (Windows Vista and Win7).
It will then install the driver for RK29 Device The setup wizard will display this screen when the driver installing is complete:
4. Transfering the firmware to the tablet
The flashing tool should display a green square around the number 1 in the lower left area of the Windows application.
Select the firmware file to flash using the button in the top right area of the application. Select the update.img file that you have prepared in the first steps. Note, the file can be named differently, it will be flashed anyway.Push the Upgrade button to transfer the selected firmware to the tablet.
It’s usually safer to use the Restore button rather than Upgrade to make sure the tablet system is properly erased prior to flash.
The firmware will be copied to the tablet, a progression counter will go from 0% to 100% on this step, followed by a verification.
You are done, let the tablet reboot and update itself. It should take a few minutes for the flash process to finish.
i m right 1st post G1 G2 G3 Mins GEN 1 GEN 2 GEN3
Flashing your Arnova GEN1 Arnova GEN2, Arnova GEN3
GEN1 flash SUPPORT MODEL
ARNOVA 10b
ARNOVA 10
ARNOVA 7
ARNOVA 8
ARNOVA 84
Flash Tool GEN 1 Hire : http://www.mediafire.com/?cbg6dzd9vww4nfv
Video Gide GEN 1 Hire :unbrick RK2818 with rkandroidbatchupgrade - YouTube!
GEN2 flash SUPPORT MODEL
ARNOVA 10 G2
ARNOVA 10 G2 philadelphialnquirer
ARNOVA 7 G2
ARNOVA 7b G2
ARNOVA 7e G2
ARNOVA 8 G2
ARNOVA 8 G2 Dual Tuch
GEN3 flash SUPPORT MODEL
ARNOVA 10d G3
ARNOVA 7B G3
ARNOVA 8 G3
ARNOVA Childpad Alvin capacitive
ARNOVA Childpad Alvin Resistive
Flash tool GEN2 GEN 3 hire http://www.mediafire.com/download.php?727ye83bty7ns2t
Arnova GEN3 Arnova GEN2 Video guide
Hire:Google Play (Android Market) on Arnova G3 and Arnova 9 G2 - YouTube!
Flashing your Arnova G1 Arnova G2, Arnova G3
Rockchip RK29xx/RK30xx based tablet with Rockchip
Arnova GEN1 GEN 2 GEN 3
1 Download and unpack the firmware you want to flash, please get the official firmware Hire : ARNOVA
for your device if you want to restore the tablet as stock or use a custom firmware.
Download and unpack Rockchip_Batch_Tool_v1.5.zip (latest Rockchip Flasher tool version 1.5)
Shutdown the tablet, you may want to wait for a few seconds to make sure it does not restart
Execute the flashing tool RKBatchTool.exe on your computer
On Windows Vista or Windows Seven, you will have to Right Click on the program and select Run as Administrator
Arnova G32. Entering /recovery flashing mode on the tablet
You need to put the device in flashing/recovery mode to transfer the firmware firmware to the tablet with Rockchip tool.
The general idea is to put a paper clip in the reset pinhole of the tablet, combined with a button press. You first need to push the reset, holding it for a few seconds then press the activation button (depends on the tablet model) while holding the reset for a few seconds, then release the activation button and the reset.
push the Volume + button on your tablet and keep the button pressed while you insert a paperclip in the RESET pinhole. Keep the paperclip pushing the reset and the Volume + button pressed for about 15 seconds. The tablet screen should turn black.
On the Arnova 9 G2 :
insert a paperclip in the Reset pinhole of the tablet and press the Menu button
On the Arnova 9 G3 and ARCHOS 97 Carbon
insert a paperclip in the Reset pinhole of the tablet and press the Home button
On the Arnova 8 G2:
insert a paperclip in the Reset pinhole of the tablet and press the Power button
On the Arnova 7 G2:
put the Power switch to the right position (where a little lock is drown)
and insert a paperclip in the Reset pinhole on the back of the tablet.
On the Arnova 7b G2:
insert a paperclip in the Reset pinhole of the tablet and press the Power button
On the Arnova ChildPad:
insert a paperclip in the Reset pinhole of the tablet and press the Power button
On the Arnova 8c G3:
Switch the tablet off, press the volume- button, keep it pressed in and then connect the tablet with an usb cable to the computer.
3. Installing the drivers on the computer
Following the tablet entering in flashing mode, the computer should now show it has found a new USB device and prompt for a device driver. Select the appropriate driver in the driver directory from the Rockchip Flash Tool 1.4 package, then select the right folder that corresponds to your computer platform and operating systems.
There are 6 supported systems:
in drivers32bits folder you will find subdirectories for the following operating systems: (Windows 2000 drivers, Windows XP, Vista and Win7 in 32 bits).
in drivers64bits you have directories supporting (Windows Vista and Win7).
It will then install the driver for RK29 Device The setup wizard will display this screen when the driver installing is complete:
4. Transfering the firmware to the tablet
The flashing tool should display a green square around the number 1 in the lower left area of the Windows application.
Select the firmware file to flash using the button in the top right area of the application. Select the update.img file that you have prepared in the first steps. Note, the file can be named differently, it will be flashed anyway.Push the Upgrade button to transfer the selected firmware to the tablet.
It’s usually safer to use the Restore button rather than Upgrade to make sure the tablet system is properly erased prior to flash.
The firmware will be copied to the tablet, a progression counter will go from 0% to 100% on this step, followed by a verification.
You are done, let the tablet reboot and update itself. It should take a few minutes for the flash process to finish.
Rockchip Customization Tool Download
- . Customization Tool 3.1. OTA. Remote Desktop. App Manage Android 6.0 Core Android 8.0 Core Android 8.0 Core +Plus +Plus System Integration. New Peripheral Module List. New Display & Touch List. NXP i.MX 6. Intel Bay Trail. Intel Cherry Trail (AIM8). Intel Apollo Lake. Rockchip RK3288. NXP i.MX 8. Rockchip.
- Sep 28, 2012 I stumbled across this post yesterday, the tool also works for our lovely Rockchip 3066 tablets. How to Root Teclast A10 Dual-core The tool is all in Chinese but you don't need to read whats happening anyway. The tablet reboots itself twice. After the first reboot I had to hard reset.
- I would like to test your Rockchip FWFactoryTool (REVAMPED with 8.x support) as i have a Kingbox K2 rk3229 tv box with 8.10 atv & want to customize the firmware but the old Rockchip FWFactoryTool does not like android 8.1 & cannot read system partition. I have also used RK3xxxfirmwaretools5.99.07.00 it extracts ok but when i try & build.